Shaashad LCD caafimaad oo 15 inji ah oo Shiinaha ah oo BOE LCD ah oo LVDS ah oo TFT LCD ah Soo-saare iyo Warshad

Shaashad LCD caafimaad oo 15 inji ah oo BOE LCD ah oo leh LVDS interface TFT LCD ah

Shaashad LCD caafimaad oo 15 inji ah oo BOE LCD ah oo LVDS ah oo TFT LCD ah Shaashad LCD ah oo muuqaala leh

Sharaxaad Gaaban:

► Lambarka Module:DV150X0M-N10

► Cabbirka: 15.0 inji

► Xallinta: (1024*RGB*768 pixels)

► Habka Bandhigga: Caadi ahaan Madow

► Arag Xagasha: 89/89/89/89(U/D/L/R)

► Is-dhexgalka:LVDS

► Iftiinka (cd/m²): 350

► Saamiga Isbarbardhigga: 1000:1

► Shaashadda Taabashada: Shaashadda Taabashada La'aanteed

Noo soo dir emayl

Faahfaahinta Badeecada

Faa'iidadayada

Calaamadaha Alaabta

FAAHFAAHINTA ALAABTA

DV150X0M-N10 waa qaab shaashadeed oo 15.0 inji ah oo caadi ahaan madow, waxayna khuseysaa guddi TFT-LCD midabkiisu yahay 15.0 inji. Guddi TFT-LCD midabkiisu yahay 15.0 inji waxaa loogu talagalay qalabka caafimaadka iyo warshadaha iyo alaabada kale ee elektaroonigga ah ee u baahan bandhigyo guddi fidsan oo tayo sare leh, saameyn muuqaal oo aad u fiican. Module-kani wuxuu raacayaa RoHS.

QAYBAHA ALAABTA

Shay	Qiimayaasha Caadiga ah
Cabbirka	15.0 inji
Xallinta	1024 * 760
Cabbirka Dulmar	326.5(H)x253.5(V)x9.7(Wadarta)
Aagga bandhigga	304.128(H)x228.096(V)
Habka bandhigga	Caadiyan madow
Habaynta Pixel	Xariijimaha toosan ee RGB
Iftiinka LCM	350cd/m2
Saamiga Isbarbardhigga	1000:1
Jihada Aragtida Ugu Fiican	IPS/Xagal Buuxa
Is-dhexgalka	LVDS
Lambarada LED-ka	5
Heerkulka Hawlgalka	'-20 ~ +70℃
Heerkulka Kaydinta	'-20 ~ +70℃
1. Guddi taabasho oo iska caabin ah/taabasho taabasho/guddi demo ah ayaa diyaar ah
2. Xidhmada hawada iyo isku xidhka indhaha waa la aqbali karaa

Qiimaynta Ugu Badan ee Dhabta ah

Shay	Astaan	MIN	MAX	Cutubka	Faallo
Danab Bixinta	VDD	-0.3	4	Gudaha
Danab Calaamadda Gelinta	Kaalay	-0.3	VDD+0.3	Gudaha
Danabka Soo Saarista Macquulka ah	VOUT	-0.3	VDD+0.3	Gudaha
Heerkulka Hawlgalka	TOPR	-20	70	℃
Heerkulka Kaydinta	TSTG	-30	80	℃

SIFOOYINKA KORONTADA

1-Hawlgalka xaaladaha:

Halbeegga	Astaan	MIN	NOOCA	MAX	Cutubka	Faallo
Danab Koronto	Vcc	3.0	3.3	3.6	Gudaha
Korontada Hadda jirta	IDD	-	410	740	m.a.
Korontada Korontada	Wakiilka Iibka	-	-	300	m.a.
Xawaaraha Degdegga ah	IRUS	-	2	3	A
Heerka Sare ee Soo-gelinta Danab	HIV	0.7VDD	-	VDD	Gudaha
Xadka Hoose ee Soo-gelinta Danab	DALXIISKA	0	-	0.3VDD	Gudaha

2-Nalalka Dambe ee Wadista:

Shay	Astaan	MIN	NOOCA	MAX	Cutubka	Faallo
Qalabka Korontada Darawalka LED Hadda	IHVDD	550	600	700	m.a.
Qalabka Korontada Darawalka LED Hadda	IHVDD	550	600	700	m.a.
Qalabka Korontada Darawalka LED Danab	HVDD	10.8	12	12.6	Gudaha
Isticmaalka Awoodda LED-ka	PBL	-	7.92	8.71	IN
Waqtiga Nolosha LED-ka	WBL	50000		-	Saacad

SAWIRADA LCD-KA

Shay	Astaan	MIN	MAX	Cutubka	Faallo
Danab Bixinta	VDD	-0.3	4	Gudaha
Danab Calaamadda Gelinta	Kaalay	-0.3	VDD+0.3	Gudaha
Danabka Soo Saarista Macquulka ah	VOUT	-0.3	VDD+0.3	Gudaha
Heerkulka Hawlgalka	TOPR	-20	70	℃
Heerkulka Kaydinta	TSTG	-30	80	℃

SIFOOYINKA KORONTADA

❤ Gaarkeenna gaarka ahxaashi xog ah ayaa la bixin karaa! Kaliya nala soo xiriirboostada.

FAA'IIDOOYINKEENA

1.Iftiinkawaa la habeyn karaa, dhalaalku wuxuu noqon karaa ilaa 1000nits.

2.Is-dhexgalkawaa la habeyn karaa, Interfaces TTL RGB, MIPI, LVDS, SPI, eDP ayaa diyaar ah.

3.Muujin'xagasha aragtida swaxaa loo habeyn karaa, xagal buuxa iyo xagal muuqaal qayb ah ayaa la heli karaa.

4.Guddi Taabashowaa la habeyn karaa, bandhiggayaga LCD wuxuu noqon karaa mid leh taabasho iska caabin ah oo gaar ah iyo guddi taabasho oo awood leh.

5.Xalka Guddiga PCBShaashadayada LCD-ga ayaa la habeyn karaa, shaashaddayada LCD-ga waxay ku taageeri kartaa guddiga kontaroolada oo leh HDMI, VGA interface.

6.LCD-ga gaarka ah ee la wadaagowaa la habeyn karaa, sida baarka, shaashadda LCD ee laba jibbaaran iyo wareegsan waa la habeyn karaa ama bandhig kasta oo qaab gaar ah leh ayaa diyaar u ah in la habeeyo.

Kusoo dhawoow weydiinta & Dooro Soultion-kaaga Habaynta!

CODSIGA

Aqoon-is-weydaarsiga LCD-ga TFT

Aqoon-is-weydaarsi TOUCH GUDIGA

Su'aalaha Badiya La Weydiiyo

S1. Waa maxay noocyada alaabtaadu?
A1: Waxaan leenahay 10 sano oo waayo-aragnimo ah oo aan ku soo saarnay TFT LCD iyo shaashad taabasho ah.
►0.96" ilaa 32" TFT LCD Module;
► Nalalka dhalaalaya ee LCD-ga gaarka loo leeyahay;
► Shaashadda LCD nooca baarka ah ilaa 48 inji;
► Shaashad taabasho oo awood leh ilaa 65";
Shaashad taabasho oo 4 fiilo ah oo 5 fiilo ah oo iska caabisa;
► Xal hal-tallaabo ah oo TFT LCD ah ayaa lagu shidaa shaashad taabasho ah.

S2: Ma ii habayn kartaa LCD-ga ama shaashadda taabashada?
A2: Haa, waxaan ku siin karnaa adeegyada habaynta dhammaan noocyada shaashadda LCD iyo guddiga taabashada.
► Shaashadda LCD-ga, dhalaalka iftiinka dambe iyo fiilada FPC waa la habeyn karaa;
► Shaashadda taabashada, waxaan u habeyn karnaa guddiga taabashada oo dhan sida midabka, qaabka, dhumucda daboolka iyo wixii la mid ah iyadoo loo eegayo baahida macaamiisha.
Kharashka NRE waa la soo celin doonaa ka dib marka tirada guud ay gaarto 5K pcs.

S3. Barnaamijyadee ayaa inta badan loo isticmaalaa alaabtaada?
► Nidaamka warshadaha, nidaamka caafimaadka, guriga caqliga badan, nidaamka intercom, nidaamka ku dhex jira, baabuurta iyo iwm.

S4. Waa maxay wakhtiga keenista?
► Dalbashada muunadaha, waxay qaadanaysaa qiyaastii 1-2 toddobaad;
► Dalabyada badan, waxay qaadataa qiyaastii 4-6 toddobaad.

S5. Ma bixisaa muunado bilaash ah?
► Wadashaqeynta ugu horreysa, muunado ayaa laga qaadi doonaa, lacagtana waxaa lagu soo celin doonaa marxaladda dalabka ballaaran.
► Wadashaqeyn joogto ah, muunado waa bilaash. Iibiyeyaashu waxay xaq u leeyihiin isbeddel kasta.

Kii hore: Beddelaha calaamadda fiidiyowga ee isku-dhafka ah una beddel RGB oo loogu talagalay TFT-Display (Guddiga Xakamaynta Muujinta)

Xiga: Shaashad LCD warshadeed oo 12.1 inji ah oo BOE LCD ah oo midabkeedu yahay TFT LCD

Annagoo ah soo-saare TFT LCD ah, waxaan ka soo qaadannaa muraayadaha hooyada noocyada ay ka mid yihiin BOE, INNOLUX, iyo HANSTAR, Century iwm., ka dibna waxaan u jarnaa cabbir yar guriga, si loogu rakibo nalka dambe ee LCD ee guriga lagu soo saaray iyadoo la adeegsanayo qalab semi-otomaatig ah oo si buuxda otomaatig ah u shaqeeya. Hawshaas waxaa ka mid ah COF (chip-on-glass), isu-geynta FOG (Flex on Glass), naqshadeynta iyo soo saarista iftiinka dambe, naqshadeynta iyo soo saarista FPC. Markaa injineeradayada khibradda leh waxay awood u leeyihiin inay habeeyaan jilayaasha shaashadda TFT LCD iyadoo loo eegayo baahida macaamiisha, qaabka guddiga LCD sidoo kale wuu habayn karaa haddii aad bixin karto khidmadda maaskaro galaas, waxaan habayn karnaa TFT LCD dhalaalaya sare leh, fiilada Flex, Interface, oo leh taabasho iyo guddiga xakamaynta dhammaantood waa la heli karaa.